Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2026-01-20 (ice, idpf)
For ice:
Cody Haas breaks dependency of needing both RSS key and LUT for
ice_get_rxfh() as ethtool ioctls do not always supply both.
Paul fixes issues related to devlink reload; adding missing deinit HW
call and moving hwmon exit function to the proper call chain.
For idpf:
Mina Almasry moves a register read call into the time sandwich to ensure
the register is properly flushed.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: read lower clock bits inside the time sandwich
ice: fix devlink reload call trace
ice: add missing ice_deinit_hw() in devlink reinit path
ice: Fix persistent failure in ice_get_rxfh
====================
Link: https://patch.msgid.link/20260120224430.410377-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to the blamed commit, the bridge_num range was from
0 to ds->max_num_bridges - 1. After the commit, it is from
1 to ds->max_num_bridges.
So this check:
if (bridge_num >= max)
return 0;
must be updated to:
if (bridge_num > max)
return 0;
in order to allow the last bridge_num value (==max) to be used.
This is easiest visible when a driver sets ds->max_num_bridges=1.
The observed behaviour is that even the first created bridge triggers
the netlink extack "Range of offloadable bridges exceeded" warning, and
is handled in software rather than being offloaded.
Fixes: 3f9bb0301d ("net: dsa: make dp->bridge_num one-based")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260120211039.3228999-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3cbf4ffba5 ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Fixes: 58deb77cc5 ("bonding: balance ICMP echoes in layer3+4 mode")
Reported-by: syzbot+c46409299c70a221415e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/696faa23.050a0220.4cb9c.001f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matteo Croce <mcroce@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260120161744.1893263-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit eeecf5d3a3.
This change lead to MHI WWAN device can't connect to internet.
I found a netwrok issue with kernel 6.19-rc4, but network works
well with kernel 6.18-rc1. After checking, this commit is the
root cause.
Before appliing this serial changes on MHI WWAN network, we shall
revert this change in case of v6.19 being impacted.
Fixes: eeecf5d3a3 ("net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260120072018.29375-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot found that ndisc_router_discovery() could read and write
in6_dev->ra_mtu without holding a lock [1]
This looks fine, IFLA_INET6_RA_MTU is best effort.
Add READ_ONCE()/WRITE_ONCE() to document the race.
Note that we might also reject illegal MTU values
(mtu < IPV6_MIN_MTU || mtu > skb->dev->mtu) in a future patch.
[1]
BUG: KCSAN: data-race in ndisc_router_discovery / ndisc_router_discovery
read to 0xffff888119809c20 of 4 bytes by task 25817 on cpu 1:
ndisc_router_discovery+0x151d/0x1c90 net/ipv6/ndisc.c:1558
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
write to 0xffff888119809c20 of 4 bytes by task 25816 on cpu 0:
ndisc_router_discovery+0x155a/0x1c90 net/ipv6/ndisc.c:1559
ndisc_rcv+0x2ad/0x3d0 net/ipv6/ndisc.c:1841
icmpv6_rcv+0xe5a/0x12f0 net/ipv6/icmp.c:989
ip6_protocol_deliver_rcu+0xb2a/0x10d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0xf0/0x1d0 net/ipv6/ip6_input.c:489
NF_HOOK include/linux/netfilter.h:318 [inline]
ip6_input+0x5e/0x140 net/ipv6/ip6_input.c:500
ip6_mc_input+0x27c/0x470 net/ipv6/ip6_input.c:590
dst_input include/net/dst.h:474 [inline]
ip6_rcv_finish+0x336/0x340 net/ipv6/ip6_input.c:79
...
value changed: 0x00000000 -> 0xe5400659
Fixes: 49b99da2c9 ("ipv6: add IFLA_INET6_RA_MTU to expose mtu value")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Rocco Yue <rocco.yue@mediatek.com>
Link: https://patch.msgid.link/20260118152941.2563857-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For these two firmware mailbox commands, in txgbe_test_hostif() and
txgbe_set_phy_link_hostif(), there is no need to read data from the
buffer.
Under the current setting, OEM firmware will cause the driver to fail to
probe. Because OEM firmware returns more link information, with a larger
OEM structure txgbe_hic_ephy_getlink. However, the current driver does
not support the OEM function. So just fix it in the way that does not
involve reading the returned data.
Fixes: d84a3ff9aa ("net: txgbe: Restrict the use of mismatched FW versions")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/2914AB0BC6158DDA+20260119065935.6015-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jijie Shao says:
====================
fix some bugs in the flow director of HNS3 driver
This patchset fixes two bugs in the flow director:
1. Incorrect definition of HCLGE_FD_AD_COUNTER_NUM_M
2. Incorrect assignment of HCLGE_FD_AD_NXT_KEY
====================
Link: https://patch.msgid.link/20260119132840.410513-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tao Wang reports that sometimes, after resume, stmmac can watchdog:
NETDEV WATCHDOG: CPU: x: transmit queue x timed out xx ms
When this occurs, the DMA transmit descriptors contain:
eth0: 221 [0x0000000876d10dd0]: 0x73660cbe 0x8 0x42 0xb04416a0
eth0: 222 [0x0000000876d10de0]: 0x77731d40 0x8 0x16a0 0x90000000
where descriptor 221 is the TSO header and 222 is the TSO payload.
tdes3 for descriptor 221 (0xb04416a0) has both bit 29 (first
descriptor) and bit 28 (last descriptor) set, which is incorrect.
The following packet also has bit 28 set, but isn't marked as a
first descriptor, and this causes the transmit DMA to stall.
This occurs because stmmac_tso_allocator() populates the first
descriptor, but does not set .last_segment correctly. There are two
places where this matters: one is later in stmmac_tso_xmit() where
we use it to update the TSO header descriptor. The other is in the
ring/chain mode clean_desc3() which is a performance optimisation.
Rather than using tx_q->tx_skbuff_dma[].last_segment to determine
whether the first descriptor entry is the only segment, calculate the
number of descriptor entries used. If there is only one descriptor,
then the first is also the last, so mark it as such.
Further work will be necessary to either eliminate .last_segment
entirely or set it correctly. Code analysis also indicates that a
similar issue exists with .is_jumbo. These will be the subject of
a future patch.
Reported-by: Tao Wang <tao03.wang@horizon.auto>
Fixes: c2837423cb ("net: stmmac: Rework TX Coalesce logic")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vhq8O-00000005N5s-0Ke5@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In be_get_new_eqd(), statistics of pkts, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. Before the commit in question, these statistics were retrieved
one by one directly from queues. Fix this by reading them into temporary
variables first.
Fixes: 2094777041 ("be2net: set interrupt moderation for Skyhawk-R using EQ-DB")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260119153440.1440578-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In idpf_net_dim(), some statistics protected by u64_stats_sync, are read
and accumulated in ignorance of possible u64_stats_fetch_retry() events.
The correct way to copy statistics is already illustrated by
idpf_add_queue_stats(). Fix this by reading them into temporary variables
first.
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260119162720.1463859-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In hns3_fetch_stats(), ring statistics, protected by u64_stats_sync, are
read and accumulated in ignorance of possible u64_stats_fetch_retry()
events. These statistics are already accumulated by
hns3_ring_stats_update(). Fix this by reading them into a temporary
buffer first.
Fixes: b20d7fe51e ("net: hns3: add some statitics info to tx process")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260119160759.1455950-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NFC stack in Linux is in poor shape, with several bugs being discovered
last years via fuzzing, not much new development happening and limited
review and testing. It requires some more effort than drive-by reviews
I have been offering last one or two years.
I don't have much time nor business interests to keep looking at NFC,
so let's drop me from the maintainers to clearly indicate that more
hands are needed.
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260118094822.10126-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4da71a77fc ("ice: read internal temperature sensor") introduced
internal temperature sensor reading via HWMON. ice_hwmon_init() was added
to ice_init_feature() and ice_hwmon_exit() was added to ice_remove(). As a
result if devlink reload is used to reinit the device and then the driver
is removed, a call trace can occur.
BUG: unable to handle page fault for address: ffffffffc0fd4b5d
Call Trace:
string+0x48/0xe0
vsnprintf+0x1f9/0x650
sprintf+0x62/0x80
name_show+0x1f/0x30
dev_attr_show+0x19/0x60
The call trace repeats approximately every 10 minutes when system
monitoring tools (e.g., sadc) attempt to read the orphaned hwmon sysfs
attributes that reference freed module memory.
The sequence is:
1. Driver load, ice_hwmon_init() gets called from ice_init_feature()
2. Devlink reload down, flow does not call ice_remove()
3. Devlink reload up, ice_hwmon_init() gets called from
ice_init_feature() resulting in a second instance
4. Driver unload, ice_hwmon_exit() called from ice_remove() leaving the
first hwmon instance orphaned with dangling pointer
Fix this by moving ice_hwmon_exit() from ice_remove() to
ice_deinit_features() to ensure proper cleanup symmetry with
ice_hwmon_init().
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
devlink-reload results in ice_init_hw failed error, and then removing
the ice driver causes a NULL pointer dereference.
[ +0.102213] ice 0000:ca:00.0: ice_init_hw failed: -16
...
[ +0.000001] Call Trace:
[ +0.000003] <TASK>
[ +0.000006] ice_unload+0x8f/0x100 [ice]
[ +0.000081] ice_remove+0xba/0x300 [ice]
Commit 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on
error paths") removed ice_deinit_hw() from ice_deinit_dev(). As a result
ice_devlink_reinit_down() no longer calls ice_deinit_hw(), but
ice_devlink_reinit_up() still calls ice_init_hw(). Since the control
queues are not uninitialized, ice_init_hw() fails with -EBUSY.
Add ice_deinit_hw() to ice_devlink_reinit_down() to correspond with
ice_init_hw() in ice_devlink_reinit_up().
Fixes: 1390b8b3d2 ("ice: remove duplicate call to ice_deinit_hw() on error paths")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Several ioctl functions have the ability to call ice_get_rxfh, however
all of these ioctl functions do not provide all of the expected
information in ethtool_rxfh_param. For example, ethtool_get_rxfh_indir does
not provide an rss_key. This previously caused ethtool_get_rxfh_indir to
always fail with -EINVAL.
This change draws inspiration from i40e_get_rss to handle this
situation, by only calling the appropriate rss helpers when the
necessary information has been provided via ethtool_rxfh_param.
Fixes: b66a972abb ("ice: Refactor ice_set/get_rss into LUT and key specific functions")
Signed-off-by: Cody Haas <chaas@riotgames.com>
Closes: https://lore.kernel.org/intel-wired-lan/CAH7f-UKkJV8MLY7zCdgCrGE55whRhbGAXvgkDnwgiZ9gUZT7_w@mail.gmail.com/
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Blamed commit implemented logic to discover available vsock transports by
grepping /proc/kallsyms for known symbols. It incorrectly filtered entries
by type 'd'.
For some kernel configs having
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VSOCKETS_LOOPBACK=y
kallsyms reports
0000000000000000 d virtio_transport [vmw_vsock_virtio_transport]
0000000000000000 t loopback_transport
Overzealous filtering might have affected vsock test suit, resulting in
insufficient/misleading testing.
Do not filter symbols by type. It never helped much.
Fixes: 3070c05b7a ("vsock/test: Introduce get_transports()")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260116-vsock_test-kallsyms-grep-v1-1-3320bc3346f2@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jamal Hadi Salim says:
====================
net/sched: teql: Enforce hierarchy placement
GangMin Kim <km.kim1503@gmail.com> managed to create a UAF on qfq by inserting
teql as a child qdisc and exploiting a qlen sync issue.
teql is not intended to be used as a child qdisc. Lets enforce that rule in
patch #1. Although patch #1 fixes the issue, we prevent another potential qlen
exploit in qfq in patch #2 by enforcing the child's active status is not
determined by inspecting the qlen. In patch #3 we add a tdc test case.
====================
Link: https://patch.msgid.link/20260114160243.913069-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-16
The first patch is by me and sets the missing CAN device default
capabilities in the CAN device layer.
The next patch is by me, target the gs_usb driver and adds the missing
unanchor URB on usb_submit_urb() error.
The last 5 patches are also from me and fix the same USB-URB leak (as
in the gs_usb driver) in the affected CAN-USB driver: ems_usb,
esd_usb, kvaser_usb, mcba_usb and usb_8dev.
* tag 'linux-can-fixes-for-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak
can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak
can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
can: dev: alloc_candev_mqs(): add missing default CAN capabilities
====================
Link: https://patch.msgid.link/20260116200323.366877-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dmitry Skorodumov says:
====================
ipvlan: addrs_lock made per port
First patch fixes a rather minor issues that sometimes
ipvlan-addrs are modified without lock (because
for IPv6 addr can be sometimes added without RTNL)
====================
Link: https://patch.msgid.link/20260112142417.4039566-1-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a simple ipvtap test to test handling
IP-address add/remove on ipvlan interface.
It creates a veth-interface and then creates several
network-namespace with ipvlan0 interface in it linked to veth.
Then it starts to add/remove addresses on ipvlan0 interfaces
in several threads.
At finish, it checks that there is no duplicated addresses.
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 068648aab7.
NFC packets may have NUL-bytes. Checking for string length is not a correct
assumption here. As long as there is a check for the length copied from
copy_from_user, all should be fine.
The fix only prevented the syzbot reproducer from triggering the bug
because the packet is not enqueued anymore and the code that triggers the
bug is not exercised.
The fix even broke
testing/selftests/nci/nci_dev, making all tests there fail. After the
revert, 6 out of 8 tests pass.
Fixes: 068648aab7 ("nfc/nci: Add the inconsistency check between the input data length and count")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260113202458.449455-1-cascardo@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In veth_get_ethtool_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics, peer_tq_xdp_xmit and
peer_tq_xdp_xmit_err, are already accumulated by veth_xdp_xmit(). Fix
this by reading them into a temporary buffer first.
Fixes: 5fe6e56776 ("veth: rely on peer veth_rq for ndo_xdp_xmit accounting")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260114122450.227982-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
fou/gue: Fix skb memleak with inner protocol 0.
syzbot reported memleak for a GUE packet with its inner
protocol number 0.
Patch 1 fixes the issue, and patch 3 fixes the same issue
in FOU.
====================
Link: https://patch.msgid.link/20260115172533.693652-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On the receive path, packet can be damaged because of buffer
overflow in Rx FIFO. Avoid misleading per-packet error log when
packet->errors is set, this can flood the log. Instead, rely on the
standard rtnl_link_stats64 stats.
Fixes: c5aa9e3b81 ("amd-xgbe: Initial AMD 10GbE platform driver")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260114163037.2062606-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
